Shaft Motors

HIWIN coreless shaft motor is extremely similar to ball screw mechanism so it could replace standard ball screw system and achieve higher speed and resolution.Besides this, shaft motor is with easy installation, no backlash issue, zero cogging force, and excellent velocity ripple.
Shaft motor was designed for low payload application and continues motion curve, including 3D printer, high speed and low payload of automatic machine, high clean environment of manufacturing equipment for semi-conductors and LCDs, mobile phone and touch pannel industry, automated optical inspection (AOI), and EDM machine tool.
  • Vmax = 5m/s
  • Amax = 5G
  • Velocity ripple = 0.55% at V =0.6 m/s(before compensating)
  • No noise
  • Direct Drive

Compared with single-axis robot

2.5 x

Maximum Velocity Increase of
2.5x

50 %

With multiple forcers
Work Efficiency Increase of 50%

UNLIMIT

Assembly multiple stators
Flexible Stroke (LMC)

Shaft Motors

LMT8

LMT2

LMT6

LMTA

LMTB

LMTC

LMTD

LMTE

LMT8

Type Continuous force [N]Continuous current [Arms]Peak force (1s) [N]Peak current (1s) [Arms]Width of stator [mm]Length of stator/Dimension N [mm] Data Sheet Interface Drawing 3D Model
LMT8D 1.8 0.8 7.4 3.2 40 20*20
LMT8Q 3.5 0.8 14.1 3.2 70 20*20
LMT8T 2.7 0.8 10.9 3.2 55 20*20

LMT2

Type Continuous force [N]Continuous current [Arms]Peak force (1s) [N]Peak current (1s) [Arms]Width of stator [mm]Length of stator/Dimension N [mm] Data Sheet Interface Drawing 3D Model
LMT2D 9 1.5 36 6 64 25*25
LMT2Q 17 1.5 68 6 112 25*25
LMT2T 13 1.5 52 6 88 25*25

LMT6

Type Continuous force [N]Continuous current [Arms]Peak force (1s) [N]Peak current (1s) [Arms]Width of stator [mm]Length of stator/Dimension N [mm] Data Sheet Interface Drawing 3D Model
LMT6D 19 1.4 76 5.6 80 30*30
LMT6Q 38 1.4 152 5.6 140 30*30
LMT6T 28 1.4 112 5.6 110 30*30

LMTA

Type Continuous force [N]Continuous current [Arms]Peak force (1s) [N]Peak current (1s) [Arms]Width of stator [mm]Length of stator/Dimension N [mm] Data Sheet Interface Drawing 3D Model
LMTA2 29 1.6 116 6.4 94 40*40
LMTA3 45 1.6 180 6.4 130 40*40
LMTA4 59 1.6 236 6.4 166 40*40

LMTB

Type Continuous force [N]Continuous current [Arms]Peak force (1s) [N]Peak current (1s) [Arms]Width of stator [mm]Length of stator/Dimension N [mm] Data Sheet Interface Drawing 3D Model
LMTB2 52 1.3 208 5.2 120 50*50
LMTB3 78 1.3 312 5.2 165 50*50
LMTB4 104 1.3 416 5.2 210 50*50

LMTC

Type Continuous force [N]Continuous current [Arms]Peak force (1s) [N]Peak current (1s) [Arms]Width of stator [mm]Length of stator/Dimension N [mm] Data Sheet Interface Drawing 3D Model
LMTC2 99 2.6 395 10.4 160 60*60
LMTC3 151 2.6 603 10.4 220 60*60
LMTC4 200 2.6 801 10.4 280 60*60
LMTC5 250 2.6 998 10.4 340 60*60
LMTC6 299 2.6 1196 10.4 400 60*60

LMTD

Type Continuous force [N]Continuous current [Arms]Peak force (1s) [N]Peak current (1s) [Arms]Width of stator [mm]Length of stator/Dimension N [mm] Data Sheet Interface Drawing 3D Model
LMTD2 137 1.9 548 7.6 220 80*80
LMTD3 205 1.9 820 7.6 310 80*80
LMTD4 274 1.9 1096 7.6 400 80*80

LMTE

Type Continuous force [N]Continuous current [Arms]Peak force (1s) [N]Peak current (1s) [Arms]Width of stator [mm]Length of stator/Dimension N [mm] Data Sheet Interface Drawing 3D Model
LMTE2 321 7.7 1284 30.8 210 125*165
LMTE3 480 11.5 1918 46 300 125*165
LMTE4 642 15.4 2569 61.6 390 125*165
Are you looking for other documents
Go to download center